[BÁN FILE] Masstel N536 SC7731 6.0 ROm stock file PAC , file pac.sc

Thảo luận trong 'TRUNG QUỐC - CHINA'

Chia sẻ trang này

  1. h@ck

    h@ck H@CKED


    [​IMG]
    [​IMG]

    Card found: S/N : 61EAFB8E , v0136
    Chinese Miracle II [SPD module] v 1.27

    Set mode to : SP [SC773x] eMMC [Android 6.x]

    Operation : Read FullFlash [ v1.27 ]

    1. Remove battery. Insert battery back
    2. Press and hold 'VolumeUp' and 'VolumeDown' keys
    -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
    3. Insert cable

    ==== Wait for phone...

    Device boot not done
    Check Drivers
    Try again


    Reconnect Power/Cable!


    Operation : Read FullFlash [ v1.27 ]

    1. Remove battery. Insert battery back
    2. Press and hold 'VolumeUp' and 'VolumeDown' keys
    -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
    3. Insert cable

    ==== Wait for phone...

    Phone found! [ 81 ]
    Port Opened
    Sync...
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync...
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds - remove cable
    FDL Ready!
    Boot Ver : SC7731 Crev eMMC Loader v2.0
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!

    FlashMode Set : Ok!
    Detected eMMC Flash , Structure detect Ok!

    [FW_READER] : Prepare Ok!
    - > Wait phone connected ...

    Phone found! [ 81 ]
    Port Opened
    Sync...
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync...
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds - remove cable
    FDL Ready!
    Boot Ver : SC7731 Crev eMMC Loader v2.0
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!

    - > Wait phone connected ...

    Phone found! [ 81 ]
    Port Opened
    Sync...
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync...
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds - remove cable
    FDL Ready!
    Boot Ver : SC7731 Crev eMMC Loader v2.0
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!

    Model Name : c177_hlg_2d1
    Model Brand : Masstel_N536
    Model Device: c177_hlg_2d1
    AndrVersion : 6.0
    BaseBand CPU: C177_HLG_2D1
    Project Ver : MRA58K release-keys
    Model Ext : Masstel N536

    [Read Mode] : HSUSB : 0x3000

    [FW_READER] : Reading Firmware Now ...

    [Read Ok] : u-boot-spl-16k.bin
    [Read Ok] : u-boot.bin
    [Read Ok] : prodnv.img
    [Read Ok] : sc7731C_CP0_modem.bin
    [Read Ok] : DSP_DM_Gx.bin
    [Read Ok] : nvitem_w.bin
    [Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin
    [Read Ok] : nvitem_wcn.bin
    [Read Ok] : logo_480x854.bin
    [Read Ok] : fblogo_480x854.bin
    [Read Ok] : boot.img
    [Read Ok] : system.img
    [Read Ok] : sysinfo.img
    [Build Ok] : cache.img
    [Read Ok] : recovery.img
    [Build Ok] : userdata.img

    AndroidInfo created
    Firmware Size : 1789 MiB
    Saved to : C:\Users\tam\Desktop\C177_HLG_2D1_c177_hlg_2d1_6.0_MRA58K_release-keys_Masstel_N536\
    Done!

    Elapsed: 00:14:31

    Reconnect Power/Cable!


    Operation : Convert InfinitySC to SPRD PAC [ v1.27 ]

    Target : C177_HLG_2D1_c177_hlg_2d1_6.0_MRA58K_release-keys_Masstel_N536
    Step #1 : Identify

    MEMORY : eMMC
    LAYOUT : eMMC NORMAL

    Step #2 : Select logic
    Select Logic : SC7731

    Step #3 : Processing data
    Build PAC
    [ADD FILE] : nvitem_w.bin
    [ADD FILE] : nvitem_wcn.bin
    [ADD FILE] : prodnv.img
    [ADD FILE] : u-boot-spl-16k.bin
    [ADD FILE] : sc7731C_CP0_modem.bin
    [ADD FILE] : DSP_DM_Gx.bin
    [ADD FILE] : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin
    [ADD FILE] : logo_480x854.bin
    [ADD FILE] : fblogo_480x854.bin
    [ADD FILE] : boot.img
    [ADD FILE] : system.img
    [ADD FILE] : sysinfo.img
    [ADD FILE] : cache.img
    [ADD FILE] : recovery.img
    [ADD FILE] : userdata.img
    [ADD FILE] : u-boot.bin
    Build Ok! Result : 0x0018
    Sign PAC ...
    Sign Ok! FW compiled!
    Elapsed: 00:00:43

    Saved to : C177_HLG_2D1_c177_hlg_2d1_6.0_MRA58K_release-keys_Masstel_N536.pac
    Done!
     
    You need 2.00 USD to view this content.
    Đang tải...

Chia sẻ trang này