[BÁN FILE] Rom stock Masstel Tab 10 7.0 MT6580

Thảo luận trong 'TRUNG QUỐC - CHINA'

Chia sẻ trang này

  1. h@ck

    h@ck H@CKED


    [​IMG]

    Card found : S/N : 61EAFB8E , v0136
    Chinese Miracle II [MTK module] v 1.58

    Operation : Format FileSystem [ v1.58 ]

    1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey

    Wait for phone...
    Phone found! [ 98 ]
    Sync...
    Inital Boot Ok!
    BB_CPU_PID : 6580
    BB_CPU_NME : [MediaTek] MT6580_S00
    BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
    Processing BROM stage
    Settings for BROM configured!
    SecCfgVal : 0x00000000
    BromVer : 0x00FF
    BLVersion : 0x0001
    PreLoader : Active [ Boot with PL ]
    BootLdrSS : NORMAL with PRELOADER
    Processing DA stage
    DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
    Sending and initialize DA ...
    Running DA ver.4.2 on BBID : 0x94
    NAND Flash : NOT INSTALLED
    eMMC Flash : 110100303038473932511397B15F21E1
    Initialize Memory ...
    DRAM already initialized by Preloader
    DAgent sent , init HW now
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0x11 , OEM : 0100
    [eMMC] : FLASH_INF : [TOSHIBA] , 29G80
    [eMMC] : FLASH_CID : 110100303038473932511397B15F21E1
    [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
    [eMMC] : FLASH_LEN : 0x00000001D2000000
    [eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
    DEV RID : 0x19BCCF9CBA4E26CD848898A328A6AC64
    INT RAM : 0x00020000
    EXT RAM : 0x40000000 [1 GiB]
    BOOT TYPE : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!


    Clear FRP ( Google Reset Protection )
    Clear Ok!

    Done!
    Elapsed: 00:00:12
    Reconnect Power/Cable!


    Operation : Check / Read Info [ v1.58 ]

    1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey

    Wait for phone...
    Phone found! [ 98 ]
    Sync...
    Inital Boot Ok!
    BB_CPU_PID : 6580
    BB_CPU_NME : [MediaTek] MT6580_S00
    BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
    Processing BROM stage
    Settings for BROM configured!
    SecCfgVal : 0x00000000
    BromVer : 0x00FF
    BLVersion : 0x0001
    PreLoader : Active [ Boot with PL ]
    BootLdrSS : NORMAL with PRELOADER
    Processing DA stage
    DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
    Sending and initialize DA ...
    Running DA ver.4.2 on BBID : 0x94
    NAND Flash : NOT INSTALLED
    eMMC Flash : 110100303038473932511397B15F21E1
    Initialize Memory ...
    DRAM already initialized by Preloader
    DAgent sent , init HW now
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0x11 , OEM : 0100
    [eMMC] : FLASH_INF : [TOSHIBA] , 29G80
    [eMMC] : FLASH_CID : 110100303038473932511397B15F21E1
    [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
    [eMMC] : FLASH_LEN : 0x00000001D2000000
    [eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
    DEV RID : 0x19BCCF9CBA4E26CD848898A328A6AC64
    INT RAM : 0x00020000
    EXT RAM : 0x40000000 [1 GiB]
    BOOT TYPE : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!

    [AP] : Initial info read Ok!

    Brand : Masstel
    ProdName : Masstel_Tab10
    ProdModel : Masstel Tab10
    Device : Masstel_Tab10
    AndroidVer: 7.0
    MTKxCPU : MT6580
    MTKxPRJ : Masstel_Tab10_20170819

    SECURITY :
    IMEI_SW [1] : 352037075414900
    IMEI_SW [2] : 352037075414918
    BTMAC Addr : 000046658001
    WiFi MAC : 000000000000

    MODEM :
    BaseBand : MT6580_S00_MOLY_WR8_W1449_MD_WG_MP_V23_1_wg_n

    Done!
    Elapsed: 00:00:08
    Reconnect Power/Cable!


    Operation : Read Flash [ v1.58 ]

    1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey

    Wait for phone...
    Phone found! [ 98 ]
    Sync...
    Inital Boot Ok!
    BB_CPU_PID : 6580
    BB_CPU_NME : [MediaTek] MT6580_S00
    BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
    Processing BROM stage
    Settings for BROM configured!
    SecCfgVal : 0x00000000
    BromVer : 0x00FF
    BLVersion : 0x0001
    PreLoader : Active [ Boot with PL ]
    BootLdrSS : NORMAL with PRELOADER
    Processing DA stage
    DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
    Sending and initialize DA ...
    Running DA ver.4.2 on BBID : 0x94
    NAND Flash : NOT INSTALLED
    eMMC Flash : 110100303038473932511397B15F21E1
    Initialize Memory ...
    DRAM already initialized by Preloader
    DAgent sent , init HW now
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0x11 , OEM : 0100
    [eMMC] : FLASH_INF : [TOSHIBA] , 29G80
    [eMMC] : FLASH_CID : 110100303038473932511397B15F21E1
    [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
    [eMMC] : FLASH_LEN : 0x00000001D2000000
    [eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
    DEV RID : 0x19BCCF9CBA4E26CD848898A328A6AC64
    INT RAM : 0x00020000
    EXT RAM : 0x40000000 [1 GiB]
    BOOT TYPE : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!

    Reading Flash Content now ...

    xGPT : Normalize settings Ok!

    Brand : Masstel
    ProdName : Masstel_Tab10
    ProdModel : Masstel Tab10
    Device : Masstel_Tab10
    AndroidVer: 7.0
    MTKxCPU : MT6580
    MTKxPRJ : Masstel_Tab10_20170819

    [Read Ok] : preloader_aeon6580_we_n.bin
    [Read Ok] : lk.bin
    [Read Ok] : boot.img
    [Read Ok] : recovery.img
    [Read Ok] : logo.bin
    [Read Ok] : secro.img
    [Read Ok] : system.img
    [Read Ok] : cache.img
    [Read Ok] : userdata.img

    [ScatCFG] : MT6580 / V1.1.2 / aeon6580_we_n / EMMC
    Android Info saved
    MAUI Meta DB saved
    HWConfig Info saved
    FW Size : 1357 MiB
    Scatter saved to : C:\Users\tam\Desktop\MT6580__Masstel__Masstel_Tab10__Masstel_Tab10__7.0__Masstel_Tab10_20170819\

    All done!

    Done!
    Elapsed: 00:06:37
    Reconnect Power/Cable!
     
    You need 2.00 USD to view this content.
    Đang tải...

Chia sẻ trang này